Development, Demonstration, and Device Physics of FET-Accessed One-Transistor GaAs Dynamic Memory Technologies

The introduction of digital GaAs into modem high-speed computing systems has led to an increasing demand for high-density memory in these GaAs technologies. To date, most of the memory development efforts in GaAs have been directed toward four- and six-transistor static RAM\u27s, which consume substantial chip area and dissipate much static power resulting in limited single-chip GaAs storage capacities. As it has successfully done in silicon, a one-transistor dynamic RAM approach could alleviate these problems making higher density GaAs memories possible. This dissertation discusses theoretical and experimental work that presents the possibility for a high-speed, low-power, one-transistor dynamic RAM technology in GaAs. The two elements of the DRAM cell, namely the charge storage capacitor and the access field-effect transistor have been studied in detail. Isolated diode junction charge storage capacitors have demonstrated 30 minutes of storage time at room temperature with charge densities comparable to those obtained in planar silicon DRAM capacitors. GaAs JFET and MESFET technologies have been studied, and with careful device design and choice of proper operating voltages experimental results show that both can function as acceptable access transistors. One-transistor MESFET- and JFET-accessed DRAM cells have been fabricated and operated at room temperature and above with a standby power dissipation that is only a small fraction of the power dissipated by the best commercial GaAs static RAM cells. A 2 x 2 bit demonstration array was built and successfully operated at room temperature to demonstrate the addressable read/write capability of this new technology

Resonant X-Ray Magnetic Scattering from CoO

We analyze the recent experiment [W. Neubeck {\em et al.}, Phys. Rev. B \vol(60,1999,R9912)] for the resonant x-ray magnetic scattering (RXMS) around the K edge of Co in the antiferromagnet CoO. We propose a mechanism of the RXMS to make the $4p$ states couple to the magnetic order: the intraatomic exchange interaction between the $4p$ and the $3d$ states and the $p$-$d$ mixing to the $3d$ states of neighboring Co atoms. These couplings induce the orbital moment in the $4p$ states and make the scattering tensor antisymmetric. Using a cluster model, we demonstrate that this modification gives rise to a large RXMS intensity in the dipole process, in good agreement with the experiment. We also find that the pre-edge peak is generated by the transition to the $3d$ states in the quadrupole process, with negligible contribution of the dipole process. We also discuss the azimuthal angle dependence of the intensity.Comment: 15 pages, 8 figure

X-Ray Magnetic Circular Dichroism at the K edge of Mn3GaC

We theoretically investigate the origin of the x-ray magnetic circular dichroism (XMCD) spectra at the K edges of Mn and Ga in the ferromagnetic phase of Mn3GaC on the basis of an ab initio calculation. Taking account of the spin-orbit interaction in the LDA scheme, we obtain the XMCD spectra in excellent agreement with the recent experiment. We have analyzed the origin of each structure, and thus elucidated the mechanism of inducing the orbital polarization in the p symmetric states. We also discuss a simple sum rule connecting the XMCD spectra with the orbital moment in the p symmetric states.Comment: 5 pages, 5 figures, accepted for publication in Physical Review

RESPOND – A patient-centred program to prevent secondary falls in older people presenting to the emergency department with a fall: Protocol for a multi-centre randomised controlled trial

Introduction: Participation in falls prevention activities by older people following presentation to the Emergency Department (ED) with a fall is suboptimal. This randomised controlled trial (RCT) will test the RESPOND program which is designed to improve older persons’ participation in falls prevention activities through delivery of patient-centred education and behaviour change strategies. Design and setting: An RCT at two tertiary referral EDs in Melbourne and Perth, Australia. Participants: Five-hundred and twenty eight community-dwelling people aged 60-90 years presenting to the ED with a fall and discharged home will be recruited. People who: require an interpreter or hands-on assistance to walk; live in residential aged care or >50 kilometres from the trial hospital; have terminal illness, cognitive impairment, documented aggressive behaviour or history of psychosis; are receiving palliative care; or are unable to use a telephone will be excluded. Methods: Participants will be randomly allocated to the RESPOND intervention or standard care control group. RESPOND incorporates: (1) home-based risk factor assessment; (2) education, coaching, goal setting, and follow-up telephone support for management of one or more of four risk factors with evidence of effective intervention; and (3) healthcare provider communication and community linkage delivered over six months. Primary outcomes are falls and fall injuries per-person-year. Discussion: RESPOND builds on prior falls prevention learnings and aims to help individuals make guided decisions about how they will manage their falls risk. Patient-centred models have been successfully trialled in chronic and cardiovascular disease however evidence to support this approach in falls prevention is limited. Trial registration. The protocol for this study is registered with the Australian New Zealand Clinical Trials Registry (ACTRN12614000336684)

Direct Imaging of Graphene Edges: Atomic Structure and Electronic Scattering

We report an atomically-resolved scanning tunneling microscopy (STM) investigation of the edges of graphene grains synthesized on Cu foils by chemical vapor deposition (CVD). Most of the edges are macroscopically parallel to the zigzag directions of graphene lattice. These edges have microscopic roughness that is found to also follow zigzag directions at atomic scale, displaying many ~120 degree turns. A prominent standing wave pattern with periodicity ~3a/4 (a being the graphene lattice constant) is observed near a rare-occurring armchair-oriented edge. Observed features of this wave pattern are consistent with the electronic intervalley backscattering predicted to occur at armchair edges but not at zigzag edges

Resonant X-Ray Scattering from URu_{2}Si_{2}

Based on a localized crystal electric field model for the U^{4+} in the (5f)^2-configuration, we analyze the resonant x-ray scattering spectra around U M_{IV} and M_{V} edges in URu_{2}Si_{2}, taking full Coulomb and spin-orbit interactions into account. We consider two level schemes, a singlet model of Santini and Amoretti and a doublet model of Ohkawa and Shimizu, and assume the antiferroquadrupolar order and the antiferromagnetic order as candidates for the ambient pressure phase and the high pressure phase. It is found that the spectral shapes as a function of photon energy are independent of the assumed level scheme, but are quite different between the antiferroquadrupole and antiferromagnetic phases, This may be useful to determine the character of the ordered phase.Comment: 8 pages, 5 figures, submitted to JPS

Managing the Socially Marginalized: Attitudes Towards Welfare, Punishment and Race

Welfare and incarceration policies have converged to form a system of governance over socially marginalized groups, particularly racial minorities. In both of these policy areas, rehabilitative and social support objectives have been replaced with a more punitive and restrictive system. The authors examine the convergence in individual-level attitudes concerning welfare and criminal punishment, using national survey data. The authors\u27 analysis indicates a statistically significant relationship between punitive attitudes toward welfare and punishment. Furthermore, accounting for the respondents\u27 racial attitudes explains the bivariate relationship between welfare and punishment. Thus, racial attitudes seemingly link support for punitive approaches to opposition to welfare expenditures. The authors discuss the implications of this study for welfare and crime control policies by way of the conclusion

Critical appraisal of technologies to assess electrical activity during atrial fibrillation: a position paper from the European Heart Rhythm Association and European Society of Cardiology Working Group on eCardiology in collaboration with the Heart Rhythm Society, Asia Pacific Heart Rhythm Society, Latin American Heart Rhythm Society and Computing in Cardiology

We aim to provide a critical appraisal of basic concepts underlying signal recording and processing technologies applied for (i) atrial fibrillation (AF) mapping to unravel AF mechanisms and/or identifying target sites for AF therapy and (ii) AF detection, to optimize usage of technologies, stimulate research aimed at closing knowledge gaps, and developing ideal AF recording and processing technologies. Recording and processing techniques for assessment of electrical activity during AF essential for diagnosis and guiding ablative therapy including body surface electrocardiograms (ECG) and endo- or epicardial electrograms (EGM) are evaluated. Discussion of (i) differences in uni-, bi-, and multi-polar (omnipolar/Laplacian) recording modes, (ii) impact of recording technologies on EGM morphology, (iii) global or local mapping using various types of EGM involving signal processing techniques including isochronal-, voltage- fractionation-, dipole density-, and rotor mapping, enabling derivation of parameters like atrial rate, entropy, conduction velocity/direction, (iv) value of epicardial and optical mapping, (v) AF detection by cardiac implantable electronic devices containing various detection algorithms applicable to stored EGMs, (vi) contribution of machine learning (ML) to further improvement of signals processing technologies. Recording and processing of EGM (or ECG) are the cornerstones of (body surface) mapping of AF. Currently available AF recording and processing technologies are mainly restricted to specific applications or have technological limitations. Improvements in AF mapping by obtaining highest fidelity source signals (e.g. catheter–electrode combinations) for signal processing (e.g. filtering, digitization, and noise elimination) is of utmost importance. Novel acquisition instruments (multi-polar catheters combined with improved physical modelling and ML techniques) will enable enhanced and automated interpretation of EGM recordings in the near future

World Heart Federation Roadmap on Atrial Fibrillation - A 2020 Update

The World Heart Federation (WHF) commenced a Roadmap initiative in 2015 to reduce the global burden of cardiovascular disease and resultant burgeoning of healthcare costs. Roadmaps provide a blueprint for implementation of priority solutions for the principal cardiovascular diseases leading to death and disability. Atrial fibrillation (AF) is one of these conditions and is an increasing problem due to ageing of the world’s population and an increase in cardiovascular risk factors that predispose to AF. The goal of the AF roadmap was to provide guidance on priority interventions that are feasible in multiple countries, and to identify roadblocks and potential strategies to overcome them. Since publication of the AF Roadmap in 2017, there have been many technological advances including devices and artificial intelligence for identification and prediction of unknown AF, better methods to achieve rhythm control, and widespread uptake of smartphones and apps that could facilitate new approaches to healthcare delivery and increasing community AF awareness. In addition, the World Health Organisation added the non-vitamin K antagonist oral anticoagulants (NOACs) to the Essential Medicines List, making it possible to increase advocacy for their widespread adoption as therapy to prevent stroke. These advances motivated the WHF to commission a 2020 AF Roadmap update. Three years after the original Roadmap publication, the identified barriers and solutions were judged still relevant, and progress has been slow. This 2020 Roadmap update reviews the significant changes since 2017 and identifies priority areas for achieving the goals of reducing death and disability related to AF, particularly targeted at low-middle income countries. These include advocacy to increase appreciation of the scope of the problem; plugging gaps in guideline management and prevention through physician education, increasing patient health literacy, and novel ways to increase access to integrated healthcare including mHealth and digital transformations; and greater emphasis on achieving practical solutions to national and regional entrenched barriers. Despite the advances reviewed in this update, the task will not be easy, but the health rewards of implementing solutions that are both innovative and practical will be great

Standardized assessment of evidence supporting the adoption of mobile health solutions: A Clinical Consensus Statement of the ESC Regulatory Affairs Committee

Mobile health (mHealth) solutions have the potential to improve self-management and clinical care. For successful integration into routine clinical practice, healthcare professionals (HCPs) need accepted criteria helping the mHealth solutions’ selection, while patients require transparency to trust their use. Information about their evidence, safety and security may be hard to obtain and consensus is lacking on the level of required evidence. The new Medical Device Regulation is more stringent than its predecessor, yet its scope does not span all intended uses and several difficulties remain. The European Society of Cardiology Regulatory Affairs Committee set up a Task Force to explore existing assessment frameworks and clinical and cost-effectiveness evidence. This knowledge was used to propose criteria with which HCPs could evaluate mHealth solutions spanning diagnostic support, therapeutics, remote follow-up and education, specifically for cardiac rhythm management, heart failure and preventive cardiology. While curated national libraries of health apps may be helpful, their requirements and rigour in initial and follow-up assessments may vary significantly. The recently developed CEN-ISO/TS 82304-2 health app quality assessment framework has the potential to address this issue and to become a widely used and efficient tool to help drive decision-making internationally. The Task Force would like to stress the importance of co-development of solutions with relevant stakeholders, and maintenance of health information in apps to ensure these remain evidence-based and consistent with best practice. Several general and domain-specific criteria are advised to assist HCPs in their assessment of clinical evidence to provide informed advice to patients about mHealth utilization